Hantek 20:1 Passive Attenuator for Pico 300v Max 10Mhz Passive Oscilloscope Signal Attenuator for Automotive Diagnostics Use,HT201

This item has been designed to allow fuel injector and primary ignition waveforms to be measured using Hantek oscilloscope products. Features: Can allow oscilloscope to measure fuel injector and primary ignition waveforms. Passive attenuator with 20:1 attenuation. If input a 20V signal, it can output a 1V signal. By using this item, oscilloscope can measure voltage higher than its range(*20V). Notice: Please note:this attenuator should not be used for any high voltage measurements other than fuel injectors and primary ignition. Specifications: Attenuation:20:1 Bandwidth:10MHz Input Resistance:1.053M Item Size:60 * 18 * 16mm / 2.36 * 0.7 * 0.6in Item Weight:24g /0.85oz

• The HT201 has been designed to allow fuel injector and primary ignition waveforms to be measured using Hantek oscilloscope products.
• Please note this attenuator should not be used for any high voltage measurements other than fuel injectors and primary ignition.
• Passive attenuator with 20:1 attenuation, if input a 20V signal, it can output a 1V signal.Because the signal is attenuated, by using this item, oscilloscope can measure voltage higher than its range(±20V)
• 【What you will get】 1 x HT201 Signal Attenuation
• 【Please Note】 After receiving the product, please check whether it is damaged. If you have any questions, please contact us in time. This product is a consumable and needs to be replaced regularly. Once the product is used, the warranty is not allowed.